smartctlraidcard

2022年7月12日—SupportfordisksbehindRAIDcontrollersishighlydependentonbothplatformandcontrollertype.RAID-Controller,Linux,FreeBSD,NetBSD ...,2022年10月18日—Itriedtocollectdatafromaserverwitharaidcontrollerthroughsmartctlexporter.However,anerroroccurredasbelow.,2018年10月11日—IstheresomethingI'moverlooking?IitpossibletogettheSMARTinformationanyotherway,exceptthehorribleAdaptecStorageManager?,201...

參考資訊如下
Checking disks behind RAID controllers

2022年7月12日 — Support for disks behind RAID controllers is highly dependent on both platform and controller type. RAID-Controller, Linux, FreeBSD, NetBSD ...

Failed to collect raid controller device SMART data #89

2022年10月18日 — I tried to collect data from a server with a raid controller through smartctl exporter. However, an error occurred as below.

Getting SMART information from Disks behind Adaptec ...

2018年10月11日 — Is there something I'm overlooking? I it possible to get the SMART information any other way, except the horrible Adaptec Storage Manager?

Hard disk info behind hardware RAID controller?

2018年7月19日 — In my tests smartctl disregards whatever path is put on the command line (eg. /dev/sda, /dev/sdb or simply /), it only honers DID number. Share.

How do you do smart tests on a RAID?

2018年2月20日 — The only way you're going to be able to see the SMART data is if your RAID card is supported in SmartCTL. Otherwise, the host cannot access the ...

How to use smartctl with one raid controller

2023年7月24日 — 1 Answer 1 ... That's normal. Your results will never match the lsscsi output, because the SCSI devices you see in lsscsi are not your physical ...

Linux UNIX

I've CentOS Linux and FreeBSD based server running using 3Ware (9650SE-2LP) RAID card. I know how to check hard disk behind Adaptec raid controllers, ...

Linux command – smartctl (RAID controllers)

2017年1月17日 — 在瀏覽器中儲存顯示名稱、電子郵件地址及個人網站網址，以供下次發佈留言時使用。

Linux Use smartctl To Check Disk Behind Adaptec RAID ...

2024年4月24日 — Use the following commands to find if RAID card detected and grab info about each disks. Is my Adaptec RAID card detected by Linux? Type the ...

Smartmontools with MegaRAID Controller

2015年10月23日 — Access to hard disks with smartctl ... Where <N> stands for the device ID on the RAID controller. These can be displayed via the StorCLI (column ...